A Winslow company - serving Winchester, NV

CGI Shingle, Tile & Metal Roofing in Winchester, NV

Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

CGI Shingle, Tile & Metal Roofing in Winchester: What to Know First

We provide independent CGI roofing services in Winchester, and a typical repair takes a day or two while a full roof replacement runs several days. Most of the CGI roof work we see in Winchester falls into a handful of predictable repairs, and we quote them with upfront pricing so the number on the invoice matches the number on the estimate. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer.

Call (855) 859-2922

This page is for Winchester homeowners who own a CGI window or door product and also need their roof sorted: a leak over a CGI-framed opening, storm damage on the shingle field, cracked tile around a CGI skylight surround, or metal panels that need to tie in cleanly at a CGI door head. As an authorized CGI installer, we know the product line from the inside out. Call (855) 859-2922 for a free estimate and a live person will pick up.

How CGI Products Fail – and How We Fix Them

CGI is a Florida-rooted brand, and its product philosophy – impact-rated glazing, hurricane-tested frames – shows up in Winchester homes more often than you’d expect. The roof interacts with those products in ways that differ from a generic installation. Here are the failures our techs see most on CGI jobs, and how we handle each.

  • Water intrusion at the CGI window head flange where it meets the shingle field. The most common CGI-related leak we find in Winchester isn’t the window at all – it’s the step flashing the roofer tied into the CGI flange when the window was set. CGI’s flanged frames sit deeper than many competitors, and if the roofer stepped the shingles to the flange face instead of weaving behind it, wind-driven rain from the west finds the gap. We reset the flashing with proper step-and-counter flashing and re-lap the shingles, keeping the CGI frame untouched.
  • Cracked tile directly above a CGI skylight or CGI-framed projection. Tile roofs over CGI openings in Winchester take expansion stress from summer heat cycling, and hairline cracks radiate from the corner of the frame because the original installer didn’t leave a control joint. We replace the cracked field tile and add a proper flashing apron that lets the tile float – rather than jack-hammering the CGI frame.
  • Sealant failure on the CGI door sill where it meets a metal roof panel. CGI sliding glass and patio doors on metal roofs are notorious for butyl tape squeeze-out a couple of seasons after install. When the tape squeezes dry, the panel-to-sill joint weeps. We strip, clean, re-seal with EPDM-compatible sealant and check the CGI sill pan for correct weep placement.
  • Fastener back-out on CGI soffit panels under a new shingle tear-off. When we re-roof around CGI soffit and fascia, the original fasteners often corrode because CGI’s galvanized coating is fine on the panel but the fasteners in a mixed-metal install aren’t matched. We replace with compatible stainless fasteners, per the CGI install guide, so the panels don’t galvanically react.
  • Color mismatch on CGI fascia re-attach after a metal roof replacement. CGI’s finish system is a coil-coat that mastics and touch-up pens can’t match on a field-applied basis. When a roofer has to pull CGI fascia to install new drip edge, a sloppy re-install shows. We pull CGI fascia per the manufacturer’s fastening spec and re-install with matched touch-up along hidden edges only.

None of these are exotic. All of them come down to how the roof interacts with a CGI product line – and the fix is almost always to respect the CGI frame and correct the roof, not the other way around.

Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Our CGI Shingle, Tile & Metal Roofing Process

  1. 1
    Call and live diagnostic intake. A real person answers 24/7 and asks exactly the questions that narrow down whether this is a CGI frame leak, a shingle field failure, a tile crack, or a metal panel joint. We schedule an in-person inspection.
  2. 2
    On-site inspection with a written line-item estimate. We get on the roof and into the attic where possible, photograph the failure, and hand you a written estimate with line-item pricing, materials, and whether the CGI frame will need re-flashing or just sealant work. No change orders later.
  3. 3
    Parts decision: OEM CGI vs. quality aftermarket. For CGI frames and flanges, we use OEM CGI parts only – aftermarket flange kits void the CGI product warranty and don’t match CGI’s step dimensions. For shingle, tile and metal roofing materials, we use manufacturer-approved systems that meet the CGI install guide so both warranties survive.
  4. 4
    The repair or replacement. Background-checked, uniformed technicians on every job. Shingle repairs take a day; tile repairs usually two; metal panel replacements one to three days depending on length.
  5. 5
    Water test and inspection. Where the failure is a leak, we water-test the CGI-roof joint with a controlled spray before we leave. You see it pass.
  6. 6
    The 36500-Day Done Right Promise. If anything we touched doesn’t perform, we come back and make it right. Nothing evaporates with the check clearing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What CGI Shingle, Tile & Metal Roofing Costs in Winchester

Real ranges for the CGI roof jobs we run most in Winchester, with line-item pricing built from the same numbers we quote on the estimate:

  • Step flashing and shingle re-lap at a CGI window or door head: $450-$950 per opening, depending on access and how much shingle field needs to be pulled.
  • Tile field repair above a CGI skylight or projection: $650-$1,400, including cracked-tile replacement and a proper flashing apron.
  • CGI sliding door sill re-seal on a metal roof: $350-$700, including butyl tape removal, EPDM-compatible re-seal, and sill pan weep check.
  • CGI soffit/fascia fastener replacement during a re-roof: $200-$450 as an add-on.
  • Full shingle roof replacement around CGI openings: $9,000-$22,000 for most Winchester homes; metal roof replacement runs $16,000-$38,000; tile is in a similar range to metal on most homes.

What moves the price: the number of CGI openings that tie into the roof, pitch and access, whether OEM CGI flashing parts are needed, and material choice. The estimate is free, and the pricing is fixed – if the scope doesn’t change, the price doesn’t change. Call (855) 859-2922 for a written line-item quote.

Why Winchester Homeowners Call Winslow Windows & Doors Winchester for CGI Work

We’ve been locally owned and owner-operated since 2011, Ed’s name is on the door and on every job we do, and the 36500-Day Done Right Promise is a century-long standard the national chains can’t match. A live person answers every call, 24/7 – a neighbor you can call at 2 a.m. and someone actually picks up.

Our technicians have up to 15 years of experience, are background-checked, and arrive in uniform. Every one of them has worked on CGI installations because we’re an authorized CGI installer, alongside PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. If a job needs a brand-coordinated approach – a CGI frame and a PGT window on the same roof wall, say – we know both lines.

Our standing offers don’t expire: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside our home county, and a permanent 10% discount for seniors and veterans. No urgency-bait, no limited-time anything.

FAQs

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (855) 859-2922
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Winslow Windows & Doors Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch