Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Sliding & Patio Doors: The Winchester Owner’s Guide
We install and replace CGI sliding and patio doors for Winchester homeowners, with typical installed pricing running $2,400 to $5,800 depending on opening size, glass package, and frame finish. CGI sliding doors are matched to specific series footprints, so the part that matters is almost always the operator: rollers, tandem roller assemblies, and the track they ride in. Most Winchester owners find out something has failed the same way – the door starts catching at the middle of its travel instead of gliding, or the leading edge drops just enough that the lock no longer lines up with the keeper. Sometimes it’s noise first, a grinding that wasn’t there last summer. Either way, the door tells you before it stops moving entirely.
Which CGI Models This Applies To
CGI makes several sliding and patio door lines, and the parts aren’t interchangeable across them. The two things that decide which replacement you need are the door series and the roller configuration. Tandem rollers – two wheels on one bracket – are common on wider panels, while single rollers show up on narrower ones. If you’re not sure what you have, look for the manufacturer label on the interior head jamb or the top of the operable panel; it usually lists the series and a glass date code. Failing that, measure the panel width, height, and thickness – CGI panels run in a few standard thicknesses, and thickness alone narrows the field fast. On the OEM-versus-aftermarket decision: OEM rollers fit the original track profile exactly, while quality aftermarket assemblies are often stronger (stainless wheels instead of nylon) and cost less. For a door still under its original coverage, OEM makes sense. For a door that’s 10 or more years old in Southern Nevada heat, we usually recommend the better aftermarket roller and let the track decide the rest.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Sliding & Patio Doors Is Failing
- The panel drags or needs a shoulder to close. Worn roller wheels flatten on one side, so the panel rides low and scrapes the track. In Winchester, dust and fine grit work into the roller housing faster than most owners expect.
- A grinding or rumbling sound as it rolls. That’s usually a seized bearing or a wheel that’s worn through its outer surface. Once you hear metal on metal, the roller is past saving.
- The lock no longer catches. A sagging panel throws the lock and keeper out of alignment. The lock isn’t the problem – the rollers or the track height are.
- Visible rust or flat spots on the rollers. Pull the panel and look. Flat spots mean replacement; light surface dust means cleaning and adjustment may buy you time.
- The track is gouged, bent, or pitted. A damaged track wears out new rollers quickly. In older Winchester homes, we sometimes find the track itself has deformed from years of heat cycling.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Roller replacement on a CGI sliding door in Winchester typically runs $150 to $320 per panel, and that’s for the pair of rollers, the labor to pull and reset the panel, and a track check. If the track needs replacement or re-profiling, add $200 to $450 depending on length and whether the frame has to come loose. Full door replacement – new panel, frame, and glass – runs $2,400 to $5,800 installed, with the number driven by opening width, impact glass versus standard, and finish. Our pricing is upfront and itemized: parts, labor, and any track work shown separately, no surprises on the invoice. The work carries our 36500-Day Done Right Promise – if it’s not done right, we make it right. We’re an independent service provider, not affiliated with CGI.
DIY or Call Us?
You can safely check a few things yourself: vacuum the track, look for flat spots or rust on the rollers with a flashlight, and lift the panel slightly to feel whether it rocks on the rollers. That tells you whether you’re dealing with dirt, wear, or a bent track. Where DIY goes wrong is pulling a full-height glass panel without help – they’re heavy, awkward, and a dropped panel is a shattered panel and a hospital visit waiting to happen. Track straightening and roller bracket adjustment also need the right shims; get it wrong and the door binds worse than before. If the door is stiff, grinding, or won’t lock, call us at (855) 859-2922 and we’ll tell you honestly whether it’s a repair or a replacement.
FAQs
Expect 8 to 12 years on original nylon rollers in Southern Nevada, less if the door faces west and takes full afternoon sun. UV and heat break down the wheel material faster here than in cooler climates, and fine desert dust accelerates the wear once the wheel surface softens.
Sometimes – if the wheels are intact and the issue is dirt or a minor adjustment, cleaning and re-shimming can restore smooth operation. Once wheels are flat-spotted, cracked, or the bearings are seized, replacement is the only fix that lasts. We’ll tell you which one you’re looking at before any work starts.
Most single-panel roller replacements take one to two hours for a two-person crew, including pulling the panel, swapping the rollers, and resetting and testing the door. Track replacement or multi-panel jobs run longer. We schedule a window, not a vague “sometime today.”
We match the part to your door’s series and roller configuration using the manufacturer label and panel measurements, then source OEM or the equivalent aftermarket assembly – whichever fits your door and budget. Nothing gets ordered until we’ve confirmed the spec against your actual door.
If your CGI sliding or patio door is dragging, grinding, or refusing to lock, call Winslow Windows & Doors Winchester at (855) 859-2922 for a free estimate. A live person answers every call, 24 hours a day – and every technician is background-checked and arrives in uniform. We’re the one down the road.
Written by the team at Winslow Windows & Doors Winchester, serving Winchester and nearby areas.