A Winslow company - serving Winchester, NV
T

Therma-Tru Roof Replacement & Installation in Winchester, NV

Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Entry doorsEntry doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate

Therma-Tru Roof Replacement & Installation in Winchester: What to Know First

Therma-Tru roof replacement and installation in Winchester usually runs $9,500 to $24,000 for a full tear-off and re-roof, and most jobs are scheduled within one to three weeks of a signed estimate. We’re an independent Therma-Tru service provider, which means we don’t answer to the manufacturer and we don’t sell you a warranty you can’t use. We price the work line by line, pull the permits, and stand behind the roof with our 36500-Day Done Right Promise. If your Therma-Tru entry door, patio door, or sidelite system sits under a failing roof, call (855) 859-2922 and we’ll walk you through what the repair actually needs.

Call (855) 859-2922

How Therma-Tru Products Fail – and How We Fix Them

Therma-Tru doors themselves hold up well. What fails is the roof and flashing around them, especially in Winchester, where summer surface temperatures on a dark shingle roof push past 160°F and the winter freeze-thaw cycles work on every seam. Here’s what we actually find on Therma-Tru homes in Winchester:

  • Fiber-Classic and Smooth-Star door frames wicking moisture at the head jamb. When the roof-to-wall flashing above a rear entry door was lapped wrong, water runs behind the brick mold instead of over it. The frame doesn’t rot right away, but the paint blisters at the top corner and the door starts sticking in July. We reset the flashing, replace the damaged trim, and verify the door still swings clear.
  • Therma-Tru patio door sills buckling from roof runoff. On homes where a low-slope porch roof dumps onto the slider threshold, the sill pan fills and the adjustable sill on a Therma-Tru sliding patio door seizes. The door isn’t the problem; the drain path is. We rebuild the roof edge and re-slope the sill so water leaves the opening.
  • Rot behind the brick mold on Fiber-Classic entry systems. The composite door slab survives; the wood jamb and brick mold around it don’t. Pulling the old roof back often reveals soft jamb stock the homeowner never saw. We replace the rot with PVC trim and back-prime everything before the new roof goes on.
  • Failed sealant joints at the door head where the roof plane meets the wall. Therma-Tru factory weatherstrip is fine. The bead of caulk the original builder ran at the roof-to-wall intersection is not, and after a decade of Winchester sun it cracks. We cut it out and use a proper flashing detail instead of another bead of caulk.
  • Improper step flashing on sidewalls next to Therma-Tru sidelites. Sidelites mean wider openings, which means more roof-to-wall length to flash. When the original roofer skipped a step, water tracks sideways and shows up as a stain on the interior drywall weeks later. We install step flashing course by course, not a single bent piece.
Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI

Our Therma-Tru Roof Replacement & Installation Process

Every Therma-Tru roof job moves through the same steps, whether you call us from a home near Warm Springs or out toward the foothills.

  1. 1
    Free inspection and written estimate. We get on the roof, photograph the flashing at every door head and sidewall, and check the attic for staining. You get a line-item quote before anyone touches a shingle.
  2. 2
    Diagnostics on the door opening. We check the Therma-Tru frame, sill, and weatherstrip on the doors that sit under the failed roof, so we know whether we’re saving the door or replacing trim. No surprises on the invoice.
  3. 3
    Parts decision, made with you. When a door component needs replacing, we lay out the OEM Therma-Tru part versus a quality aftermarket equivalent, including the warranty trade-off, so you choose. We carry Therma-Tru parts as an authorized Therma-Tru installer.
  4. 4
    Tear-off and dry-in. We pull the permit, remove the old roof, inspect the deck, and dry in the same day so the house isn’t open to weather overnight.
  5. 5
    Re-flash and re-roof. New underlayment, new flashing at every Therma-Tru opening, and the shingle, tile, or metal system you selected.
  6. 6
    Test and cleanup. We water-test the door openings, sweep the yard with a magnet for nails, and walk the finished roof with you. If it isn’t done right, we come back.

What Therma-Tru Roof Replacement & Installation Costs in Winchester

Here’s what Winchester homeowners typically pay. These are real ranges for the work, not teaser numbers.

Job Typical range
Roof-to-wall flashing repair at Therma-Tru door openings $450 – $1,200
Partial re-roof over a porch or rear addition $4,500 – $8,000
Full tear-off and re-roof, asphalt shingle, 1,800-2,400 sq ft $9,500 – $17,000
Full re-roof with tile or metal $16,000 – $24,000
Therma-Tru jamb, sill, or trim replacement during roof work $300 – $900

What moves the price: roof pitch, how many Therma-Tru openings need re-flashing, whether the deck is sound, and the roofing material. We give a free second opinion on any written estimate you already have, and there’s no trip charge inside our home county. Call (855) 859-2922 to schedule your free estimate.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Winchester Homeowners Call Winslow Windows & Doors Winchester for Therma-Tru Work

We’re locally owned and owner-operated, with a published address and license number, and Ed’s name is on the door and on every job we do. A live person answers the phone any hour, day or night. Every technician is background-checked and arrives in uniform, so you know who’s at your door before the truck pulls up. Our technicians have up to 15 years of experience, and they know how a Therma-Tru opening should be flashed before the first shingle goes down. If you own a different brand, we’re also an authorized installer for PGT, CGI, CWS, and ES Windows, so our Therma-Tru expertise comes with a full exterior-protection team behind it. Standing offers include $40 off any repair over $200 and a permanent 10% discount for seniors and veterans.

FAQs

Get Your Free Therma-Tru Roof Estimate in Winchester

Your Therma-Tru door deserves a roof that keeps water out of the opening. Call Winslow Windows & Doors Winchester at (855) 859-2922 for a free estimate, a free second opinion on any written quote, and upfront pricing with no surprises on the invoice. A neighbor you can call at 2 a.m. – and someone will actually answer. We’re the one down the road.

Written by the team at Winslow Windows & Doors Winchester, serving Winchester and nearby areas.

Need Windows & Doors help nationwide? Licensed & insured · free written estimates
Call (855) 859-2922
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Winslow Windows & Doors Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch