Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Custom & Geometric Windows in Winchester: What to Know First
We provide independent CGI custom and geometric window work in Winchester, from arched and radius units to oversized shaped openings, typically with a free on-site estimate within a few days and installation scheduled after your field measurements are confirmed. Most custom CGI shapes and specialty glazing assemblies take several weeks to order and fabricate, so plan on a lead time measured in weeks rather than days. Pricing is quoted upfront as a written line-item estimate – no change orders once the work begins.
This page is for Winchester homeowners who already own or are planning CGI custom and geometric windows – arches over entryways, half-rounds and eyebrows, trapezoids under gables, curved bay and radius units, and oversized picture openings – and want them measured, installed, or repaired correctly. Our technicians have up to 15 years of experience. As an independent CGI service provider, Winslow Windows & Doors Winchester is not affiliated with or authorized by CGI. Call (855) 859-2922 for a free estimate.
How CGI Products Fail – and How We Fix Them
CGI custom and geometric windows show a few predictable problems in Winchester homes, and each one has a different cause than a standard rectangular window would. Here’s what we actually see on CGI jobs.
- Radius and arch frames that don’t follow the opening. On CGI curved and arched units, the frame is built to a template – and if the opening was framed a little off, the unit can sit with a visible gap at the crown or springline. We template the actual opening with a flexible jig before we set the unit, then check the reveal with a level and a trammel across the arc. A gap that a paper template missed will show up under real measurements.
- Water tracking at the mullion on shaped assemblies. CGI geometric units often combine shapes through a vertical or horizontal mullion. Under a driving rain, water can collect at the joint if the sealant or weep path isn’t dressed right. We re-dress the mullion seal and verify weep channels drain before we close out the job.
- Seal and gasket compression on angled corners. On CGI trapezoid and eyebrow windows, the corner where frame meets glass carries stress that a 90-degree corner doesn’t. Gaskets wear or flatten at those points and start to show a draft or condensation line. We replace the gasket to the manufacturer’s profile so the frame doesn’t leak, rather than running a bead of caulk over the problem.
- Fogging inside the sealed unit. If the insulated glass unit on a CGI custom shape breaks its seal, moisture gets in and the window fogs. The fix is a replacement sealed unit built to the same shape and dimension. We order to the OEM spec where it’s available and confirm the match before install.
- Hardware and operator wear on oversized openings. Large CGI picture units and shaped casements take more load on their operators and hinges. When a hinge or handle wears out, we replace with a correct replacement part rather than a universal aftermarket piece that’s close but not right – especially on units still inside their window.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Custom & Geometric Windows Process
- 1
Free on-site diagnostic. We measure the opening, check the frame for plumb and square, and confirm the shape and glazing spec against the unit’s label so we’re quoting the right CGI product.
- 2
Written line-item estimate. You get a clear, upfront price for parts and labor before any work starts. If you’ve got a written estimate from another contractor, we’ll give you a free second opinion on it.
- 3
Parts decision. We prefer the OEM part for the CGI unit when it’s available, and where aftermarket is the only option we confirm the exact spec before ordering – no guessing on a shaped frame.
- 4
The install or repair. Our background-checked, uniformed technicians arrive on time and set the unit or complete the fix, checking the reveal, mullion, and weep path as they go.
- 5
Test and sign-off. We operate the window, check the seal, and confirm the shape fits the opening before we call it done.
- 6
Cleanup and the guarantee. We leave the area clean and the work stands behind our 36500-Day Done Right Promise: if it’s not done right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Custom & Geometric Windows Costs in Winchester
Every CGI job is different, but here’s what Winchester homeowners commonly see for the scenarios we quote most. These are ranges – your written estimate is the real number.
| Job | Typical Price Range |
|---|---|
| Replacement sealed glass unit (custom shape) | $400 – $1,200 per unit, depending on shape and glazing |
| Gasket and seal re-dressing on a geometric mullion | $150 – $450 |
| Hardware or operator replacement on an oversized unit | $180 – $500 |
| New CGI custom or geometric window install | $900 – $2,800+ per unit, tied to size and shape |
| Oversized or complex arched assembly | Quoted per opening once measured |
Prices move with the shape (arches and trapezoids cost more than standard rectangles), the glass spec, the opening size, and whether the opening needs framing work. We give you a written line-item quote so you see the split between parts and labor. Call (855) 859-2922 for a free estimate and a real number for your Winchester home.
Why Winchester Homeowners Call Winslow Windows & Doors Winchester for CGI Work
We’re locally owned and owner-operated, and Ed’s name is on the door – and on every job we do. That’s a written, upfront price and a 36500-Day Done Right Promise behind it, so if a custom CGI unit isn’t right, we come back. We answer the phone with a live person, day or night. Our technicians are background-checked and arrive in uniform, so you know who’s at the door before the handshake.
We know the CGI lines, we know the custom and geometric shapes, and we back it with our authorized installs of PGT, CWS, ES Windows, ECO Window Systems, Therma-Tru, Mr-Glass, ViewLux, and PGT – if your project calls for a different premium line we’ll tell you straight. For Winchester homeowners who’ve dealt with no-show crews and vague estimates, we’re the one down the road you can actually reach.
FAQs
Yes. We install and service CGI custom and geometric windows in Winchester, including arches, trapezoids, eyebrows, and oversized shaped units. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer. Call (855) 859-2922 for a free estimate.
It can, so we handle it carefully. We work to the spec of your existing CGI unit and replace parts to spec wherever possible, which protects your coverage. Before we start, we’ll walk you through what’s covered and where a repair might affect a claim. Call (855) 859-2922 to talk it through with us.
Often, yes. We check what’s available for your unit’s model and glazing spec, prefer the OEM part when it exists, and confirm the match before ordering. On an older shape, the right replacement seated correctly is often better than replacing the whole window. Call (855) 859-2922 and we’ll confirm what’s available for your unit.
Replace the sealed unit rather than the whole window when the frame and shape are in good condition and only the glass has fogged or failed. That’s cheaper and keeps the shape you already have. If the frame is out of square or the seal is gone at the mullion, we look at a full replacement. We’ll tell you which one your window needs.
A repair or sealed-unit swap is usually done in a single visit once the part is in. New custom and geometric CGI installs depend on fabrication lead time, which is weeks, not days – we give you a real timeline once the opening is measured. Call (855) 859-2922 to get started with a free estimate.
Call (855) 859-2922 for a free estimate on your CGI custom and geometric window project in Winchester. We’ll answer live, give you an upfront written quote, and stand behind the work with our 36500-Day Done Right Promise – if it’s not done right, we make it right.
Written by the team at Winslow Windows & Doors Winchester, serving Winchester and nearby areas.